氟化铵快速分解－电感耦合等离子体质谱法测定地球化学样品中的稀土元素

测定地球化学样品中的微量稀土元素常用混酸分解法或碱熔融法,这些常规方法往往存在耗费试剂量多、基体效应大、操作周期长等缺点。本文采用氟化铵作熔剂,在旋盖聚四氟乙烯坩埚中220℃熔融样品,后采用2毫升硝酸和0.5毫升高氯酸、硫酸（1+1）在电热板上继续分解,建立了氟化铵分解 －电感耦合等离子体质谱法测定岩石、土壤和水系沉积物中15种微量稀土元素的分析方法。本方法能快速、有效地分解样品,经三种国家标准物质验证（岩石、土壤、水系沉积物）,方法的准确度ΔlgC在0.001～0.02之间,测定值与认定值相符。方法检出限为0.001～0.04μg／g之间,精密度RSD%在1.11％ ～4.85％之间,能够满足微量稀土元素的分析要求,方法具有简单快捷、消耗试剂少、检出限低、精密度与准确度好等特点,适合于地球化学等地质样品微量稀土元素的批量快速分析测定。     

Trace metal analyses in honey samples from selected countries. A potential use in bio-monitoring

Honey is a sweet product made by bees using nectar from flowers. Concentrations of Ca, K, Mg, Fe, Zn, Mn, Cu, Pb and Cd were determined in 13 honey samples from the selected regions around the world. Levels of Ca, Mg, Cu, Fe, Zn and Mn were measured using flame atomic absorption spectrometry (FAAS). Potassium concentration was determined via flame photometry. Concentrations of Cd and Pb were determined using the electrothermal technique (ETAAS). It was estimated that the examined samples of honey from Greece, Turkey, Spain, Poland, Mexico, Argentina and Italy were of good quality in terms of metal concentrations (compliant with the norms referring to food products – WHO, Fifty-third Report of the joint FAO/WHO Expert Committee on Food Additives; Technical Report Series 776, Geneva), although the analysed samples were not free of heavy metals. The concentrations of the elements in the honey samples ranged from 2.38 to 9.31 μg · g^?1 for Zn, from 3.86 to 35.10 μg · g^?1 for Fe, from 0.19 to 21.64 μg · g^?1 for Mn, from 49.53 to 1006.90 μg · g^?1 for Ca, from 388.25 to 4761.50 μg · g^?1 for K and from 0.20 to 1.53 μg · g^?1 for Cu and regarding heavy metals from 0.11 to 2.78 μg · g^?1 for Pb and from 0.02 to 0.44 μg · g^?1 for Cd. According to these results it was found that the concentrations of heavy metals in the honey samples (except for alfalfa honey and eucalyptus honey from Italy) were under the acceptable limits for foods set out by the FAO/WHO. It was confirmed that the application of chemometric tools supports the extraction of significant information from analytical data, even though the availability of samples is not fully sufficient (this problem is often encountered in environmental analyses).     

Ansa‐Bridged Bis(benzene) Titanium Complexes

Taking advantage of an improved synthesis of [Ti(η⁶‐C₆H₆)₂], we report here the first examples of ansa‐bridged bis(benzene) titanium complexes. Deprotonation of [Ti(η⁶‐C₆H₆)₂] with nBuLi in the presence of N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine (pmdta) leads to the corresponding 1,1′‐dilithio salt [Ti(η⁶‐C₆H₅Li)₂] ? pmdta that enables the preparation of the first one‐ and two‐atom‐bridged complexes by simple salt metathesis. The ansa complexes were fully characterized (NMR spectroscopy, UV/Vis spectroscopy, elemental analysis, and X‐ray crystallography) and further studied electrochemically and computationally. Moreover, [Ti(η⁶‐C₆H₆)₂] is found to react with the Lewis base 1,3‐dimethylimidazole‐2‐ylidene (IMe) to give the bent sandwich complex [Ti(η⁶‐C₆H₆)₂(IMe)].     

Taming Tin(IV) Polyazides

The first charge‐neutral Lewis base adducts of tin(IV) tetraazide, [Sn(N₃)₄(bpy)], [Sn(N₃)₄(phen)] and [Sn(N₃)₄(py)₂], and the salt bis{bis(triphenylphosphine)iminium} hexa(azido)stannate [(PPN)₂Sn(N₃)₆] (bpy = 2,2′‐bipyridine; phen = 1,10‐phenanthroline; py = pyridine; PPN = N(PPh₃)₂) have been prepared using covalent or ionic azide‐transfer reagents and ligand‐exchange reactions. The azides were isolated on the 0.3 to 1 g scale and characterized by IR and NMR spectroscopies, microanalytical and thermal methods and their molecular structures determined by single‐crystal XRD. All complexes have a distorted octahedral Sn[N]₆ coordination geometry and possess greater thermal stability than their Si and Ge homologues. The nitrogen content of the adducts of up to 44 % exceed any Sn^IV compound known hitherto.     

Topochemical Transformations of CaX2 (X=C,Si, Ge) to Form Free‐Standing Two‐Dimensional Materials

Topochemical transformations of layered materials CaX₂ (X=Si, Ge) are the method of choice for the high‐yield synthesis of pristine, defect‐free two‐dimensional systems silicane and germanane, which have advanced electronic properties. Based on solid‐state dispersion‐corrected calculations, mechanisms for such transformations are elucidated that provide an in‐depth understanding of phase transition in these layered materials. While formation of such layered materials is highly favorable for silicane and germanane, a barrier of 1.2 eV in the case of graphane precludes its synthesis from CaC₂ topochemically. The energy penalty required for distorting linear acetylene into a trans‐bent geometry accounts for this barrier. In contrast it is highly favorable in the heavier analogues, resulting in barrierless topochemical generation of silicane and germanane. Photochemical generation of the trans‐bent structure of acetylene in its first excited state (S₁) can directly generate graphane through a barrierless condensation. Unlike the buckled structure of silicene, the phase‐h of CaSi₂ with perfectly planar silicene layers exhibits the Dirac cones at the high symmetry points K and H. Interestingly, topochemical acidification of the cubic phase of calcium carbide is predicted to generate the previously elusive platonic hydrocarbon, tetrahedrane.     

粉末压片—X射线荧光光谱法测定土壤中的铜铅锌砷锑钴铬镍等重金属元素

采用粉末压片法制样,使用ZSX PrimusⅡ型X射线荧光光谱仪,对土壤样品中与生命健康和环境污染有直接影响的重金属元素Cu、Pb、Zn、As、Sb、Co、Cr、Ni进行同时测定.选用土壤国家标准物质、以国家标准物质为基体自制校准物质绘制标准曲线,解决了相关标准不足的问题,拓宽了元素测定范围(10~20 000μg/g),重点探讨了As、Sb的测量条件.虽然As、Sb的检出限和准确测定下限较高,但对于土壤质量的评价有重要的参考意义.方法快速、简便、准确.     

微波消解电感耦合等离子体质谱法测定桃中稀土元素及其分布

以市场销售的桃为实验材料,利用微波消解电感耦合等离子体质谱法(ICP-MS)同时测定桃中稀土元素的含量。样品经过硝酸-氢氟酸-双氧水微波消解,实现了桃中16种稀土元素的测定。各元素的检出限在0.004~0.020μg·g-1之间,方法精密度在0.78%~2.96%,回收率在95.0%~106.0%之间。比较了稀土元素在果皮和果肉中的分布。结果表明,稀土元素在果皮中的含量明显高于果肉。本法快速、准确,可用于桃等水果中稀土元素的测定。     

破乳诱导萃取-电感耦合等离子体质谱法测定柴油中的锰、铁和铅

采用破乳诱导萃取的前处理方法,结合电感耦合等离子体质谱技术(ICP-MS),测定了柴油中的锰、铁和铅元素。首先将样品和表面活性剂溶液(Triton X-114)混合形成稳定的油包水乳液,以硝酸作萃取剂充分萃取柴油中的锰、铁和铅,然后将乳液离心破乳分层,采用ICP-MS内标法测定酸性水相中的锰、铁和铅。3种元素的检出限(3S/N)在0.008~0.083μg·L-1之间,测定下限(10S/N)在0.027~0.28μg·L-1之间。应用该方法对柴油中金属元素进行测定,加标回收率在94.9%~106%之间,相对标准偏差(n=6)在0.66%~2.2%之间。     

A Gallium‐Substituted Distibene and an Antimony‐Analogue Bicyclo[1.1.0]butane: Synthesis and Solid‐State Structures

RGa {R=HC[C(Me)N(2,6‐iPr₂C₆H₃)]₂} reacts with Sb(NMe₂)₃ with insertion into the Sb? N bond and elimination of RGa(NMe₂)₂ ( 2 ), yielding the Ga‐substituted distibene R(Me₂N)GaSb?SbGa(NMe₂)R ( 1 ). Thermolysis of 1 proceeded with elimination of RGa and 2 and subsequent formation of the bicyclo[1.1.0]butane analogue [R(Me₂N)Ga]₂Sb₄ ( 3 ).     

Direct Imaging of Octahedral Distortion in a Complex Molybdenum Vanadium Mixed Oxide

Complex Mo,V‐based mixed oxides that crystallize in the orthorhombic M1‐type structure are promising candidates for the selective oxidation of small alkanes. The oxygen sublattice of such a complex oxide has been studied by annular bright field scanning transmission electron microscopy. The recorded micrographs directly display the local distortion in the metal oxygen octahedra. From the degree of distortion we are able to draw conclusions on the distribution of oxidation states in the cation columns at different sites. The results are supported by X‐ray diffraction and electron paramagnetic resonance measurements that provide integral details about the crystal structure and spin coupling, respectively.